all published data at t case = 25c unless otherwise indicated esd: electrostatic discharge sensitive deviceobserve handling precautions! 4600 silicon drive | durham, nc 27703 | www.wolfspeed.com rev. 03, 2018-05-21 wideband ldmos two-stage integrated power amplifer 2 x 20 w, 28 v, 1805 C 2200 mhz features ? on-chip matching for broadband operation ? typical pulsed cw performance, 1990 mhz, 28 v, combined outputs - output power at p 1db = 37 w - linear gain = 31.5 db - effciency = 53.1% ? capable of handling 10:1 vswr @28 v, 37 w (cw) output power ? integrated esd protection ? human body model class 1b (per ansi/esda/ jedec js-001) ? integrated temperature compensation ? pb-free and rohs compliant description the ptmc210204md is a wideband, two-stage ldmos integrated amplifier intended for wideband driver applications. it has internal matching for operation from 1805 to 2200 mhz. it features on-chip matching high efficiency, and dual independent outputs with 20 w of output power each. it is available in a 14-lead plastic overmold pack - age with gull wing leads. rf characteristics single-carrier wcdma specifications (tested in wolfspeed production test fixture) v dd = 28 v, i dq1(a+b) = 63 ma, i dq2(a+b) = 219 ma, p out = 5 w avg, ? = 1990 mhz, 3gpp wcdma signal, channel band - width = 3.84 mhz, peak/average = 7.5 db @ 0.01% ccdf characteristic symbol min typ max unit linear gain g ps 29 30 db power added effciency pae 17.5 18.5 % adjacent channel power ratio acpr C49.5 C47.5 dbc output par @ 0.01% ccdf opar 7.0 7.2 db 0 15 30 45 60 0 10 20 30 40 32 37 42 47 efficiency (%) peak/average ratio, gain (db) average output power (dbm) single - carrier wcdma drive - up v dd = 28 v, i dq1 = 124ma, i dq2 = 438 ma , ? = 1990 mhz 3gpp wcdma signal, par = 7.50 db, 3.84 mhz bw par @ 0.01% ccdf gain efficiency PTMC210404MD - g1 package pg-hb1dso-14-1 (formed leads) PTMC210404MD
4600 silicon drive | durham, nc 27703 | www.wolfspeed.com rev. 03, 2018-05-21 2 PTMC210404MD dc characteristics stage 1 conditions symbol min typ max unit drain leakage current v ds = 28 v, v gs = 0 v i dss 0.1 a v ds = 60 v, v gs = 0 v i dss 1 a gate leakage current v gs = 1 v, v ds = 0 v i gss 0.1 a on-state resistance v gs = 10 v, v ds = 0.1 v r ds(on) 1.5 ? operating gate voltage v ds = 28 v, i dq1 = 63 ma v gs1 2.7 v fixture operating gate voltage v ds = 28 v, i dq1 = 63 ma v gs1 4.9 v stage 2 conditions symbol min typ max unit drain-source breakdown voltage v gs = 0 v, i ds = 10 ma v br(dss) 64 v drain leakage current v ds = 28 v, v gs = 0 v i dss 0.1 a v ds = 60 v, v gs = 0 v i dss 1 a gate leakage current v gs = 1 v, v ds = 0 v i gss 0.1 a on-state resistance v gs = 10 v, v ds = 0.1 v r ds(on) 1.5 ? operating gate voltage v ds = 28 v, i dq2 = 219 ma v gs2 2.7 v fixture operating gate voltage v ds = 28 v, i dq2 = 219 ma v gs2 4.9 v maximum ratings parameter symbol value unit drain-source voltage v dss 65 v gate-source voltage v gs C6 to +10 v junction temperature t j 225 c storage temperature range t stg C65 to +150 c operating voltage v dd 0 to 32 v thermal characteristics characteristic symbol value unit thermal resistance stage 1 (t case = 70c, 37 w cw) r q jc 6.7 c/w stage 2 (t case = 70c, 37 w cw) r q jc 1.4 c/w moisture sensitivity level level test standard package temperature unit 3 ipc/jedec j-std-020 260 c
4600 silicon drive | durham, nc 27703 | www.wolfspeed.com rev. 03, 2018-05-21 3 PTMC210404MD 5 15 25 35 45 55 -65 -55 -45 -35 -25 -15 32 37 42 47 efficiency(%) acp up & low (dbc) average output power (dbm) single - carrier wcdma drive - up v dd = 28 v, i dq1 = 124ma, i dq2 = 438 ma , ? = 1990 mhz, 3gpp wcdma signal, par = 7.50 db, bw = 3.84 mhz efficiency acp up acp low PTMC210404MD - g2 0 5 10 15 20 25 30 10 15 20 25 30 35 40 1800 1900 2000 2100 2200 efficiency (%) gain (db) frequency (mhz) single - carrier wcdma broadband performance v dd = 28 v, i dq1 = 124ma, i dq2 = 438 ma , p out = 37dbm, 3gpp wcdma signal, par = 7.50 db efficiency gain PTMC210404MD - g3 ordering information type and version order code package and description shipping PTMC210404MD v1 r5 PTMC210404MD-v1-r5 pg-hb1dso-14-1, 14-lead, overmold tape & reel, 500 pcs evaluation boards order code frequency description ltn/PTMC210404MD v1 1805 C 2200 mhz class ab with combined outputs, r04350, 0.508 mm thick find gerber files for these reference fixtures on the wolfspeed web site at www.wolfspeed.com/rf typical rf performance (data taken in production test fixture)
4600 silicon drive | durham, nc 27703 | www.wolfspeed.com rev. 03, 2018-05-21 4 PTMC210404MD -40 -30 -20 -10 0 20 25 30 35 1800 1900 2000 2100 2200 input return loss (db) gain (db) frequency (mhz) small signal cw gain & input return loss v dd = 28 v, i dq1 = 124ma, i dq2 = 438 ma input return loss gain PTMC210404MD - g7 typical performance (cont.) -50 -40 -30 -20 -10 -55 -50 -45 -40 -35 1800 1900 2000 2100 2200 return loss (db) acp (dbc) frequency (mhz) single - carrier wcdma broadband performance v dd = 28 v, i dq1 = 124ma, i dq2 = 438 ma , p out = 37dbm, 3gpp wcdma signal, par = 7.50 db input return loss acp PTMC210404MD - g4 0 15 30 45 60 0 10 20 30 40 32 37 42 47 efficiency (%) gain (db) output power (dbm) cw performance v dd = 28 v, i dq1 = 124ma, i dq2 = 438 ma efficiency gain 1990mhz 1960mhz 1930mhz PTMC210404MD - g5
4600 silicon drive | durham, nc 27703 | www.wolfspeed.com rev. 03, 2018-05-21 5 PTMC210404MD load pull performance load pull performance C pulsed cw signal: v dd = 28 v, i dq1 = 63 ma, i dq2 = 219 ma, class ab, each side. p 1db max output power max drain efficiency freq [mhz] zs [ ?] zl [ ? ] gain [db] p out [dbm] p out [w] pae [%] zl [ ? ] gain [db] p out [dbm] p out [w] pae [%] 1805 49.8+j2.3 8.8-j6.30 29.8 43.8 23.8 51.2 13.4-j3.7 31.0 42.9 19.4 55.9 1960 49.9-j0.1 8.5-j8.20 29.5 43.8 23.9 50.5 10.9-j2.4 31.0 42.7 18.5 57.0 2170 51.9+j0.2 7.4-j7.60 27.9 43.9 24.3 51.8 7.10-j3.8 29.0 42.9 19.6 56.6 2200 49.3+j1.0 7.7-j7.70 27.6 43.8 23.8 51.5 6.90-j3.7 28.8 42.8 19.0 56.6 reference circuit, 1805 C 2200 mhz reference circuit assembly diagram (not to scale) c 202 r 101 c 208 r 201 c 109 c 110 r 111 c 108 c 107 c 106 c 201 c 203 c 204 c 105 c 207 c 205 c 206 r 107 r 110 r 106 c 102 c 101 c 104 c 103 c 112 c 111 r 109 r 105 r 104 r 108 r 102 r 103 u 1 u 2 ptmc 210404 md _ 03 a gw _ v 1 1 . 8 - 2 . 2 ghz v 1 ro 4350 , 20 mil , 2 oz rf _ out rf _ in v g 1 a v g 2 a v d 1 a v g 1 b v g 2 b v d 1 b v d 2 b v d 2 a
4600 silicon drive | durham, nc 27703 | www.wolfspeed.com rev. 03, 2018-05-21 6 PTMC210404MD pinout diagram vd2/rfout b vd1 a vg2 a vg1 a rfin a n/c n/c n/c n/c rfin b vg1 b vg2 b vd1b vd2/rfout a 1 2 3 4 5 6 7 8 9 10 11 12 14 13 p t m c 2 1 0 2 0 4 m d _ p d _ 5 - 2 - 2 0 1 6 source: plated copper heat slug on back - side of package vd2/rf out a vd2/rf out b rf in a rf in b components information component description manufacturer p/n input c101, c103, c105, c107, c109, c111, c203, c207 capacitor, 4.7 f murata electronics north america grm32er71h475ka88l c102, c104, c106, c108, c110, c112, c202, c206 capacitor, 10 f taiyo yuden umk325c7106mm-t c201, c204, c205, c208 capacitor, 10 pf atc atc800a100jt250t r101, r103 resistor, 0.0 ohms panasonic electronic components erj-3gey0r00v r102, r201 resistor, 50 ohms anaren c8a50z4a r104, r105, r106, r107 resistor, 1k ohms panasonic electronic components erj-8geyj102v r108, r109, r110, r111 resistor, 4.3k ohms panasonic electronic components erj-8geyj432v u1, u2 hybrid coupler anaren x3c21p1-03s reference circuit (cont.) reference circuit assembly dut PTMC210404MD v1 test fixture part no. ltn/PTMC210404MD v1 pcb rogers 4350b, 0.508 mm [0.020] thick, 2 oz. copper, r = 3.66, ? = 1805 C 2200 mhz find gerber files for this test fixture on the wolfspeed web site at www.wolfspeed.com/rf
4600 silicon drive | durham, nc 27703 | www.wolfspeed.com rev. 03, 2018-05-21 7 PTMC210404MD package outline specifications package pg-hb1dso-14-1 (formed leads) diagram notes-unless otherwise specifed: 1. mold/dam bar/metal protusions of 0.30 mm max per side not included. 2. metal protrusions are connected to source and shall not ecxceed 0.10 mm max. 3. fillets and radii: all radii are 0.3 mm max. 4. interpret dimensions and tolerances per iso 8015. 5. dimensions are mm. 6. all tolerances 0.1 mm. 7. all metal surfaces pre-plated, except area of cut. 8. lead thickness: 0.25 mm. 9. gold plating thickness: 0.25 micron [10 microinch] max. 4x 1. 02 9. 02 0.52 x 45 2x 5 . 30 7. 65 2.35 3.83 2x 2. 02 2x 0 . 35 1 . 50 2x 3. 25 11 x 1.00 13.06 4 . 00 2.62 0. 10 max. 1.27 1. 86 z y 12 x 0. 35 1 14.94 0.15 4 x 7 2 x 10 19. 44 1 viewy pg - hb1dso - 14 l_ 01 _ 11 - 06 - 2015 z (5:1) r 0.20 1.00 1.02 2 2 3 . 00 0. 05 2x 0. 50 6 . 91 3 . 45 16 . 26 18 . 44 0 .25 0 . 25 5 3 stand off 0...0. 1 0 min . diagram notesCunless otherwise specifed: 1. mold/dam bar/metal protusion of 0.30mm max per side not included. 2. metal protrusion are connected to source and shall not exceed 0.10mm max. 3. fillets and radii: all radii are 0.3 mm max. 4.interpret dimensions and tolerances per iso 8015. 5. dimensions are mm. 6. all tolerances 0.1mm unless specifed otherwise. 7. all metal surfaces pre-plated, except area of cut. 8. lead thickness: 0.25 mm. 9. gold plating thickness: 0.25 micron [10 microinch] max. diagram notesunless otherwise specifed: 1. mold/dam bar/metal protrusion of 0.30 mm max per side not included. 2. metal protrusions are connected to source and shall not exceed 0.10 mm max. 3. fillets and radii: all radii are 0.30 mm max. 4. interpret dimensions and tolerances per iso 8015. 5. dimensions are mm. 6 all tolerances 0.1 mm unless specifed otherwise. 7. all metal surfaces pre-plated, except area of cut. 8. lead thickness: 0.25 mm. 9. gold plating thickness: 0.25 micron max. pg-hb1dso-14-1_01_01-16-2017
4600 silicon drive | durham, nc 27703 | www.wolfspeed.com rev. 03, 2018-05-21 8 PTMC210404MD package outline specifications (cont.) package pg-hb1dso-14-1 (formed leads, bottom side) diagram notes-unless otherwise specifed: 1. mold/dam bar/metal protusions of 0.30 mm max per side not included. 2. metal protrusions are connected to source and shall not ecxceed 0.10 mm max. 3. fillets and radii: all radii are 0.3 mm max. 4. interpret dimensions and tolerances per iso 8015. 5. dimensions are mm. 6. all tolerances 0.1 mm. 7. all metal surfaces pre-plated, except area of cut. 8. lead thickness: 0.25 mm. 9. gold plating thickness: 0.25 micron [10 microinch] max. 4x 1. 02 9. 02 0.52 x 45 2x 5 . 30 7. 65 2.35 3.83 2x 2. 02 2x 0 . 35 1 . 50 2x 3. 25 11 x 1.00 13.06 4 . 00 2.62 0. 10 max. 1.27 1. 86 z y 12 x 0. 35 1 14.94 0.15 4 x 7 2 x 10 19. 44 1 viewy pg - hb1dso - 14 l_ 01 _ 11 - 06 - 2015 z (5:1) r 0.20 1.00 1.02 2 2 3 . 00 0. 05 2x 0. 50 6 . 91 3 . 45 16 . 26 18 . 44 0 .25 0 . 25 5 3 stand off 0...0. 1 0 min . diagram notesCunless otherwise specifed: 1. mold/dam bar/metal protusion of 0.30mm max per side not included. 2. metal protrusion are connected to source and shall not exceed 0.10mm max. 3. fillets and radii: all radii are 0.3 mm max. 4.interpret dimensions and tolerances per iso 8015. 5. dimensions are mm. 6. all tolerances 0.1mm unless specifed otherwise. 7. all metal surfaces pre-plated, except area of cut. 8. lead thickness: 0.25 mm. 9. gold plating thickness: 0.25 micron [10 microinch] max. diagram notesunless otherwise specifed: 1. mold/dam bar/metal protrusion of 0.30 mm max per side not included. 2. metal protrusions are connected to source and shall not exceed 0.10 mm max. 3. fillets and radii: all radii are 0.30 mm max. 4. interpret dimensions and tolerances per iso 8015. 5. dimensions are mm. 6 all tolerances 0.1 mm unless specifed otherwise. 7. all metal surfaces pre-plated, except area of cut. 8. lead thickness: 0.25 mm. 9. gold plating thickness: 0.25 micron max. pg-hb1dso-14-1_01_01-16-2017
|
